The Cendence remote controller is a professional-grade, customizable remote controller designed for full integration with other advanced DJI products like the Inspire 2 and CrystalSky monitor.
Cendence offers modular components and controls that realize the full potential of Inspire 2 applications. It provides up to five analog control channels with over ten customizable buttons, improving overall control efficiency. Its design offers antenna interchangeability where a high-gain antenna can augment the power of DJI Lightbridge technology, significantly increasing overall anti-interference and image quality. Cendence comes with the fully integrated Cendence Monitor Mounting Bracket and HDMI, SDI, USB, and CAN ports provide robust expansion capabilities.
The two knobs on the front panel control gimbal pitch and yaw, and the right/left levers and Focus Adjustment Knob used to tune flight controller settings and the gimbal camera in real-time, allowing you to pull focus and set aperture.
For quick camera adjustments, you can customize several shortcut buttons for particular groups of settings, or save frequently used settigns.
Customizable buttons can quickly enable or disable frequently used functions like focus peaking, color waveform, obstacle avoidance, and home point resetting. They can also close warnings and tips mid-flight, all without using an app.
Rotate the dials or toggle the right/left levers while holding certain buttons to control gimbal roll, shutter speed, or ISO.
The CrystalSky monitor mounts to the Cendence remote controller via the Cendence Monitor Mounting Bracket.The Cendence remote controller’s antennas, PCB, mounting bracket, and battery are all detachable, making itshardware easily upgradable, allowing you to customize the controller for compatibility with future DJI aircraft.
When precision camera control is required, Cendence can connect either as a Master or Slave controllerwith the Inspire 2’s remote controller or another Cendence remote controller.
1. SDI and HDMI ports support broadcasting at 1080i 50 fps and 720p 60 fps.
2. Connect DJI Focus, or other compatible accessories via the CAN port.
3. The USBA port supports connectivity with other mobile devices
Cendence’s redesigned planar antennas significantly increase gain, ensuring high-quality video transmission at up to 10 Mbps within 4 km.Higher gain also extends the max transmission distance from 7 km to 10 km. Moreover, the antennas transmit signal in a specific direction,which effectively reduces interference from other directions and makes transmission even more stable and reliable.
The Cendence remote controller uses a detachable battery that operates for up to four hours. If you run out of power,just swap in a charged battery or charge Cendence via the power port. Cendence uses the same batteries asCrystalSky monitor for enhanced product synergy.
Cendence is currently compatible with Inspire 2 and Matrice 200 series aircraft.
Type | GL800A |
---|---|
Operating Frequency | 2.400-2.483 GHz; 5.725-5.825 GHz |
Max Transmitting Distance (unobstructed, free of interference) | 2.4 GHz: 4.3 miles (7 km, FCC); 2.2 miles (3.5 km, CE); 2.5 miles (4 km, SRRC) 5.8 GHz: 4.3 miles (7 km, FCC); 1.2 miles (2 km, CE); 3.1 miles (5 km, SRRC) |
EIRP | 2.4 GHz: 26 dBm (FCC); 17 dBm (CE); 20 dBm (SRRC) 5.8 GHz: 28 dBm (FCC); 14 dBm (CE); 20 dBm (SRRC) |
Power Supply | Intelligent Battery (Type: WB37-4920mAh-7.6V) |
Intelligent Battery | 4923 mAh LiPo |
Charging | DJI charger |
Output Power | 20 W (supplying power to DJI CS550 monitor) 12 W (without supplying power to monitor) |
Video Output Ports | USB, HDMI, SDI |
USB Supply Power | iOS: 1 A, 5.2 V (Max); Android: 1.5 A, 5.2 V (Max) |
Dual User Capability | Master-and-Slave connection |
Operating Temperature | -4 ° to 104 °F (-20 ° to 40 °C) |
Storage Temperature | Less than 3 months: -4 ° to 113 °F (-20 °to 45 °C) More than 3 months: 72 °to 82 °F (22 °to 28 °C) |
Charging Temperature | 32 ° to 104 °F (0 °to 40 °C) |
Charging Time | About 2 hours and 24 minutes (using a 180 W charger) |
Supply Power Time | About 4 hours (only Master remote controller function enabled and without supplying power to monitor) |
Weight | 1041 g |